For 1990-2009 cars only
Removal Procedure
- Replace the batteries when the range of the transmitter decreases to less than 7 m (23 ft).
- Insert a small coin between the two halves of the transmitter case at the slot provided near the key ring hole.
- Twist the coin in order to open the case.
- Open the transmitter case.
- Remove the battery (2).
Installation Procedure
- Install the battery (2) with the positive (+) side down.
- Close the transmitter case (6, 4).
- Ensure that the seal is in position. Align the two halves of the case and snap the two halves together.
- Reprogram the transmitter. Refer to Transmitter Programming .
Use one 3 V CR2032 battery (or the equivalent).
