GM Service Manual Online
For 1990-2009 cars only

Cut, Groove or Worn Center Pillar Upper Garnish Molding at Seat Belt Opening on Driver and/or Passenger Side (Install Updated Center Pillar Upper Garnish Molding)

Subject:Cut, Groove or Worn Center Pillar Upper Garnish Molding at Seat Belt Opening on Driver and/or Passenger Side (Install Updated Center Pillar Upper Garnish Molding)

Models:2006-2007 Buick Lucerne



Condition

Some customers may comment on a cut, groove or worn center pillar upper garnish molding at the seat belt opening on the driver and/or passenger side.

Cause


Object Number: 1971243  Size: SH

The seat belt may rub the center pillar upper garnish molding leaving a grooved mark in the soft plastic upper molding as shown above.

Correction

Important: You must inspect the seat belt assembly and seat belt webbing. Refer to Seat Belt Service Precautions in SI.

Install an updated center pillar upper garnish molding. Refer to Center Pillar Upper Garnish Molding Replacement in SI.

Parts Information

Part Number

Description

Qty

15851771

Panel, Center Pillar Trim --LH

(Titanium) (83I)

As Necessary

15851766

Panel, Center Pillar--RH

(Titanium) (83I)

As Necessary

15851770

Panel, Center Pillar--LH

(Cashmere) (39I)

As Necessary

15851765

Panel, Center Pillar--RH

(Cashmere) (39I)

As Necessary

15851769

Panel, Center Pillar--LH

(Shale) (40I)

As Necessary

15851764

Panel, Center Pillar--RH

(Shale) (40I)

As Necessary

15851768

Panel, Center Pillar--LH

(Ebony) (19I)

As Necessary

15851763

Panel, Center Pillar--RH

(Ebony) (19I)

As Necessary

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Description

Labor Time

C3194

Trim, Center Pillar - Left - R&R or Replace

Use Published Labor Operation Time

C3184

Trim, Center Pillar - Right - R&R or Replace