For 1990-2009 cars only
Lower Garnish Molding Trim Does Not Fit Properly, Gap Between Body and Trim (Replace Lower Garnish Molding Trim Fastener)
| Subject: | Lower Garnish Molding Trim Does Not Fit Properly, Gap Between Body and Trim (Replace Lower Garnish Molding Trim Fastener) |
| Models: | 2006-2008 Buick Lucerne |
Do This | Don't Do This |
|---|---|
Replace the trim fasteners clips. | Do not replace the lower garnish molding trim. |
Condition
Some customers may comment that the trim panel between the front and rear doors does not fit properly. A gap may be seen between the body and the trim.
Cause
This condition may be caused by the trim faster not being engaged to the sheet metal.
Correction
Replace the two fasteners at the base of the center pillar trim. Refer to Center Pillar Lower Garnish Molding Replacement in SI.
Parts Information
Part Number | Description | Qty |
|---|---|---|
11570047 | Clip (Fastener) | 2 |
Warranty Information
For vehicle repaired under warranty, use;
Labor Operation | Description | Labor Time |
|---|---|---|
C3184 | Trim, Center Pillar - Right - R&R or Replace | Use Published Labor Operation Time |
C3194 | Trim, Center Pillar - Left - R&R or Replace |
