Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
Circuit/System Description
The IPC calculates the mileage based on the serial data vehicle speed information from the ECM/PCM. The IPC receives the vehicle odometer information from the body control module (BCM) via the serial data circuit. The odometer will display 'error' if an internal IPC memory failure is detected. The odometer displays either miles or kilometers as requested through the DIC Vehicle Information Menu.
Reference Information
Schematic Reference
Connector End View Reference
Description and Operation
Instrument Cluster Description and Operation
Electrical Information Reference
Scan Tool Reference
Control Module References for scan tool information
Circuit/System Verification
Ignition ON, verify the odometer trip reset switch toggles between season and trip odometer when the switch is pressed.
| ⇒ | If the odometer trip reset switch does not toggle between season and trip odometer, replace the IPC. |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for the IPC replacement, setup and programming
