Electronic Brake Control Module Programming and Setup. Buick Lucerne 2008

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2008 🢒 Lucerne 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Electronic Brake Control Module Programming and Setup

If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:

•	EBCM Reprogramming--Refer to Service Programming System (SPS) .

•	Recalibrate the brake pedal position (BPP) sensor. Refer to Brake Pedal Position Sensor Replacement .

If the EBCM needs to be reprogrammed, refer to Service Programming System (SPS) .