GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2009 🢒 Lucerne 🢒 Engine 🢒 Engine Cooling 🢒 Drive Belt Tensioner Shield Replacement

Drive Belt Tensioner Shield Replacement LD8

Removal Procedure

    Object Number: 1662858 Size: SH
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.
  2. Remove the water pump drive belt tensioner shield bolt/nuts.
  3. Remove the water pump drive belt tensioner shield.

Installation Procedure

    Object Number: 1662858 Size: SH
  1. Install the water pump drive belt tensioner shield onto the studs.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the water pump drive belt tensioner shield bolt/nuts.

    3. Tighten
    Tighten the bolt/nuts to 10 N·m (89 lb in).

  3. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.