Removal Procedure
Note: DO NOT remove the screws from the upper air cleaner cover.
- Loosen the air cleaner cover screws (1).
- Open the air cleaner cover.
- Remove the air filter from the air cleaner.
Note: For the LZ9 engine, the air cleaner cover has a hydro carbon adsorber that is not serviceable. If the adsorber shows any kind of physical damage the cover must be replaced.
- Inspect the air cleaner housing assembly for damage. If a problem is found, replace as necessary.
Installation Procedure
- Install the air filter to the air cleaner.
- Close the air cleaner cover. Ensure that the inboard hinges are engaged prior to tightening the screws.
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the air cleaner cover screws (1) to
3 N·m(27 lb in).