GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2009 🢒 Lucerne 🢒 Suspension 🢒 Front Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure

    Object Number: 155689 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the stabilizer shaft bracket bolts.
  3. Remove the stabilizer shaft bracket.
  4. Using a pry bar, lift upwards on the stabilizer shaft and remove the stabilizer shaft insulator.

Installation Procedure

    Object Number: 155689 Size: SH
  1. Using a pry bar, lift up on the stabilizer shaft and install the stabilizer shaft insulator.
  2. Install the stabilizer shaft bracket.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the stabilizer shaft bracket bolts.

    4. Tighten
    Tighten the stabilizer shaft bracket bolts to 50 N·m (37 lb ft).

  4. Lower the vehicle.