GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2009 🢒 Lucerne 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Link Replacement

Removal Procedure

    Object Number: 105020 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the stabilizer shaft link bolts.
  3. Remove the stabilizer shaft link insulators and spacer.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 105020 Size: SH
  1. Loosely install the stabilizer link insulators, spacer, nut and bolt.

    2. Tighten
    Tighten the stabilizer shaft link nut to 15 N·m (11 lb ft).

  2. Lower the vehicle.