GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2009 🢒 Lucerne 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 155718 Size: SH
  2. Remove the stabilizer shaft bracket retaining bolt.

    3. Object Number: 155720 Size: SH
  3. Bend the open end of the stabilizer shaft bracket upward.
  4. Remove the stabilizer shaft and insulator.

Installation Procedure

    Object Number: 155720 Size: SH
  1. Install the stabilizer shaft insulator to the stabilizer shaft with the slit forward.

    2. Object Number: 155718 Size: SH
  2. Bend the stabilizer shaft bracket downward to close around the insulator. Ensure that the stabilizer shaft is centered.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the stabilizer shaft bracket retaining bolt.

    4. Tighten
    Tighten the stabilizer shaft bracket retaining bolt to 33 N·m (24 lb ft).

  4. Lower the vehicle.