GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2009 🢒 Lucerne 🢒 Suspension 🢒 Suspension General Diagnosis 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the front wheels and tires. Refer to Tire and Wheel Removal and Installation.
  3. Remove the stabilizer shaft link bolt.

    4. Object Number: 155688 Size: SH
  4. Remove the stabilizer shaft insulators and spacers.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 155688 Size: SH
  1. Loosely install the stabilizer link components.

    2. Tighten
    Tighten the stabilizer link nuts to 17 N·m (13 lb ft).

  2. Install the front wheels and tires. Refer to Tire and Wheel Removal and Installation.
  3. Lower the vehicle.