Removal Procedure
Note: There is a TV antenna amplifier on both the left and the right sides of the vehicle.
- Remove the left and/or right quarter trim panels. Refer to
Quarter Upper Trim Panel Replacement.
- Disconnect the coaxial cable (4) and the electrical connection (3).
- Remove the bolts (1) from the TV antenna amplifier (2).
- Remove the TV antenna amplifier (2).
Installation Procedure
- Install the TV antenna amplifier module (2).
Ensure that the alignment tab is located properly before tightening the bolts (1).
Caution: Refer to Fastener Caution in the Preface section.
- Install the bolts (1).
Tighten
Tighten the bolts (1) to 9 N·m (80 lb in).
- Connect the coaxial cable (4) and the electrical connection (3).
- Install the left and, or right quarter trim panels. Refer to
Quarter Upper Trim Panel Replacement.