Caution: To avoid paint damage, protect the area surrounding the part which you are removing or installing.

Preliminary Procedures

1. Use a J 25070 Heat Gun or equivalent to remove the old fender ornament. Clean all adhesive from the front fender, then wipe the surface dry with a clean lint-free towel, prior to installing the new fender ornament.
2. When removing protective liners from adhesive tape, be careful not to touch the tape with your hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
3. Never allow the body temperature to be below 19°C (66°F) prior to ornament installation.
4. Ensure the fender panel is free from dirt and foreign matter prior to the ornament installation.

1

Front Fender Ornament

Tip
Remove the protective adhesive tape liner and carefully insert the ornament into the 4 openings in the upper front fender.

Caution: To avoid paint damage, protect the area surrounding the part which you are removing or installing.

Preliminary Procedures

1. Use a J 25070 or equivalent to remove the old fender ornament. Clean all adhesive from the front fender, then wipe the surface dry with a clean lint-free towel, prior to installing the new fender ornament.
2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
3. Never allow the body temperature to be below 19°C (66°F) prior to ornament installation.
4. Ensure the fender panel is free from dirt and foreign matter prior to the ornament installation.

1

Front Fender Ornament

Tip
Remove the protective adhesive tape liner and carefully insert the ornament into the 3 openings in the upper front fender.