Preliminary Procedures

1. Remove the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
2. Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement.

1

Steering Column Tilt Wheel Actuator Cable

Tip
The steering column tilt wheel actuator cable contains ends that must be gently squeezed to release it from the tilt motor.

2

Steering Column Tilt Wheel Actuator Motor Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
1.5 N·m (13 lb in)

3

Tilt Motor

Procedure

1. Disconnect any electrical connectors as needed.
2. Transfer any parts as needed.