Sunroof Motor/Actuator Replacement Smart Motor

1. Lower the headliner in order to access the sunroof motor/actuator. Refer to Headlining Trim Panel Replacement.
2. Disconnect the electrical connector.
3. Remove the screws securing the sunroof motor/actuator to the module.

1. Install the sunroof motor/actuator to the sunroof module.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the sunroof motor/actuator screws.

Tighten
Tighten the screws to 6 N·m (53 lb in).

3. Connect the electrical connector.
4. Verify the sunroof operation.
5. Initialization/Teach the sunroof motor. Refer to Sunroof Motor/Actuator Initialization/Teach Process.
6. Install the headliner. Refer to Headlining Trim Panel Replacement.
7. Refer to Control Module References for programming and setup information.