Ignition Lock Cylinder Case Bracket Replacement. Buick Lucerne 2009

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2009 🢒 Lucerne 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Ignition Lock Cylinder Case Bracket Replacement

Callout	Component Name
Preliminary Procedures Remove the turn signal multifunction switch. Refer to Turn Signal Multifunction Switch Replacement. Remove the ignition lock cylinder case. Refer to Ignition Lock Cylinder Case Replacement.
1	Ignition Lock Cylinder Case Bracket Bolt Caution: Refer to Fastener Caution in the Preface section. Tip The ignition lock cylinder case bracket bolt is not present on manual steering columns. Tighten 7 N·m (62 lb in)
2	Ignition Lock Cylinder Case Bracket

Callout

Component Name

Preliminary Procedures

Remove the turn signal multifunction switch. Refer to Turn Signal Multifunction Switch Replacement.
Remove the ignition lock cylinder case. Refer to Ignition Lock Cylinder Case Replacement.

Ignition Lock Cylinder Case Bracket Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tip
The ignition lock cylinder case bracket bolt is not present on manual steering columns.

Tighten
7 N·m (62 lb in)

Ignition Lock Cylinder Case Bracket