GM Service Manual Online
For 1990-2009 cars only

Suction Hose Replacement LZ9


Object Number: 2089310  Size: MF

Callout

Component Name

Preliminary Procedure

  1. Recover the refrigerant from the air conditioning (A/C) system. Refer to Refrigerant Recovery and Recharging
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
  3. Remove the front air deflector. Refer to Front Air Deflector Replacement
  4. Note: Seal the A/C system ports after the hose is removed in order to keep A/C system from being contaminated.

  5. Disconnect the air conditioning (A/C) refrigerant pressure sensor electrical connector.

1

Suction Hose Retaining Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
Tighten the bolt to 16 N·m (12 lb ft).

2

Sealing Washer

Procedure

Remove and discard the sealing washer. Refer to Sealing Washer Replacement

3

Suction Hose Retaining Nut

Tighten
Tighten the bolt to 16 N·m (12 lb ft).

4

Sealing Washer

Procedure

Remove and discard the sealing washer. Refer to Sealing Washer Replacement

5

Suction Hose

Procedure

Leak test the fittings using J 39400-A Halogen Leak Detector

Special Tools

J 39400-A Halogen Leak Detector

Suction Hose Replacement LD8


Object Number: 1649196  Size: SF

Callout

Component Name

Preliminary Procedure

  1. Recover the refrigerant from the air conditioning (A/C) system. Refer to Refrigerant Recovery and Recharging
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
  3. Remove the front air deflector. Refer to Front Air Deflector Replacement
  4. Note: Seal the A/C system ports after the hose is removed in order to keep A/C system from being contaminated.

  5. Disconnect the A/C compressor and condenser hose electrical connector.

1

A/C Compressor Hose Retaining Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
16 N·m (12 lb ft)

2

Sealing Washer

Procedure

Remove and discard the sealing washer. Refer to Sealing Washer Replacement

3

A/C Compressor Hose Retaining Nut

Tighten
16 N·m (12 lb ft)

4

Sealing Washer

Procedure

Remove and discard the sealing washer. Refer to Sealing Washer Replacement

5

A/C Compressor Hose

Procedure

Leak test the fittings using J 39400-A Halogen Leak Detector

Special Tools

J 39400-A Halogen Leak Detector