FRT. SEAT CENTER ARMREST ANGLE TOO GREAT-NEW PROC. TO ADJUST

SUBJECT: FRONT SEAT CENTRE ARMREST ANGLE (NEW PROCEDURE TO ADJUST)

VEHICLES AFFECTED: 1992 "C" AND "H" MODELS ----------------------------------------------------------------------------

CONDITION:

---------- On some 1992 C and H vehicles, the armrest angle may be too great for proper use.

CORRECTION:

----------- This condition can be corrected as follows:

1. Remove the front seat assembly

2. Remove the centre armrest

3. Use two standard .25 (1/4) inch washers as shims on each rear armrest attaching stud to level the armrest. (See illustration)

For vehicles being repaired under warranty use:

Labour Time: 0.5 hr.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.