1. Turn the ignition ON with the engine in RUN.
2. If the charge indicator is not on, detach the wire harness at the generator and the ground L terminal.

Does the indicator go on?

--

Go to Step 4

Go to Step 2

1. Check for an open in CKT 225.
2. Repair any open circuit.

Does the indicator go on?

--

Go to Starter and Charging System Check

Go to Step 3

Check for a burned out indicator bulb. Replace as needed.

Does the indicator go on?

--

Go to Starter and Charging System Check

--

Repair or replace the generator. Refer to Engine Electrical, Generator Replacement.

Is the repair complete?

--

Go to Starter and Charging System Check

--