Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 |
Do the washers operate? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the wiper motor. Refer to Windshield Wiper Motor Replacement . Is the repair complete? | -- | -- | |
4 |
Is the test light on? | -- | Go to Step 10 | Go to Step 5 |
5 | Connect a test light from wiper motor connector (harness side), terminal B, to ground. Is the test light on? | -- | Go to Step 9 | Go to Step 6 |
6 | Check the WSW fuse in the IP Fuse Block. Is the fuse open? | -- | Go to Step 7 | Go to Step 8 |
7 | Replace the fuse. Is the replacement complete? | -- | -- | |
8 | Repair the open in CKT 243. Is the replacement of repair complete? | -- | -- | |
9 | Repair the open in CKT 150. Is the repair complete? | -- | -- | |
10 | Connect a test light from the wiper motor connector (harness side), terminal H, to ground. Is the test light on? | -- | Go to Step 14 | Go to Step 11 |
11 | Check the WSW/RFA fuse in the IP Fuse Block. Is the fuse open? | -- | Go to Step 12 | Go to Step 13 |
12 | Replace the fuse. Is the replacement complete? | -- | -- | |
13 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle . Is the replacement complete? | -- | -- | |
14 | Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement . Is the replacement complete? | -- | -- |
