For 1990-2009 cars only
- Inspect the transaxle wiring harness assembly (224) for:
- Position the wire harness assembly (224) onto the valve body (300) and pump assembly (200).
- Mate each connector into its respective electrical component and engage the locking tabs.
- Secure the harness conduit into the retaining clip (226) on the oil pump cover (201).
- Assemble the automatic transaxle temperature sensor (391) into the retaining clip (390).
| • | Cut or pinched wires |
| • | Cut wire insulation |
| • | Bent or broken electrical connectors |
| • | Damaged terminal pins |
