- Remove the key from the
ignition switch.
- Connect the inflatable restraint IP module yellow 2-way connector (2)
located above the right sound insulator (4).
- Install the connector
position assurance (CPA) (2) to the inflatable restraint IP module
yellow 2-way connector (1) located above the right sound insulator.
- Install the right sound insulator. Refer to
Instrument Panel Trim Panel Replacement - Right Side
in Instrument
Panel, Gauges and Console.
- Connect the inflatable
restraint steering wheel yellow 2-way connector (1) located near the
base of the steering column.
- Install the connector position assurance (CPA) (2) to the
inflatable restraint steering wheel yellow 2-way connector (1) located
near the base of the steering column.
- Install the left sound insulator (3). Refer to
Instrument Panel Trim Panel Replacement - Left Side
in Instrument
Panel, Gauges and Console.
- Install the SIR Fuse to the underhood fuse block.
- Staying well away from both air bags, turn the ignition switch
to the RUN position. The following actions should occur:
| 9.1. | The AIR BAG warning lamp flashes 7 times. |
| 9.2. | The AIR BAG warning lamp turns OFF. |
- Perform the SIR diagnostic system check if the AIR BAG warning
lamp does not operate as described. Refer to
SIR Diagnostic System Check
.
