Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
|
- Turn the ignition switch to RUN.
- Place the HUD dim switch to maximum intensity.
|
• | The following components illuminate for approximately 4 seconds: |
• | The check gauges indicator |
• | All segments of the digital speedometer |
• | After the 4 second segment test, the HUD speedometer displays
0. |
| HUD System
Inoperative
|
2
| Move
the HUD dim switch from maximum to minimum intensity.
| The HUD image intensity dims.
| HUD Dim Switch does
not Vary the HUD Image Intensity
|
3
|
- Move the HUD dim switch to maximum intensity.
- Use the HUD up/down switch in order to move the HUD image up and
down.
| The HUD
image moves up and down on the windshield.
| HUD Dim Switch does not Move Up or Down
|
4
|
- Start the engine.
- Drive the vehicle.
| The HUD
speedometer displays approximately the same speed as the instrument cluster.
| HUD Speedometer
Inoperative
|
5
| Press
the ENG/MET switch.
| The HUD speedometer and units (MPH or km/h) indicator change between
English and metric.
| HUD Speedometer and Units (MPH or km/h) Indicator do not Change between
English and Metric
|
6
|
- Turn on the hazard flashers switch.
- Turn on the headlights.
- Place the headlamp dimmer switch in HIGH.
|
• | The left turn signal and right turn signal indicators flash. |
• | The high beam indicator is on. |
• | The HUD dims with the headlights on. |
• | The HUD high beam indicator is on. |
| HUD LH Turn
Signal, Right Turn Signal and the High Beam Indicators are Inoperative
|
7
|
- Use the IP dimming switch in order to vary the intensity of the
instrument cluster display.
- Turn off the headlights.
- Move the HUD dim switch to the minimum intensity (OFF).
| The interior
dimming switch varies the HUD image intensity with the headlights on.
|
• | The IP Dimming Switch does not vary the HUD image intensity with
the headlights on. Refer to Lighting System Check. |
|
* Refer to the appropriate symptom diagnostic table for
the applicable abnormal result.
|