Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
|
- Turn the ignition switch to RUN.
- Close the front doors.
- Unbuckle the left front safety belt.
- Do not engage the parking brake.
|
• | The ABS indicator illuminates briefly. |
• | The AIR BAG warning indicator flashes 7 times. |
• | The BRAKE indicator illuminates briefly. |
• | The CRUISE indicator illuminates briefly. |
• | The high temperature indicator on the temperature gauge illuminates
briefly. |
• | The low fuel indicator on the fuel gauge illuminates briefly. |
• | The MPH and km/h indicators on the speedometer illuminate briefly. |
• | The OIL indicator illuminates briefly. |
• | The SEAT BELT indicator illuminates for about 70 seconds. |
• | The SECURITY indicator illuminates briefly. |
• | The SERVICE ENGINE SOON indicator illuminates briefly. |
• | The SERVICE VEHICLE SOON indicator illuminates briefly. |
• | The TRAC OFF indicator illuminates briefly, if equipped. |
• | The VOLTS indicator illuminates briefly. |
|
• | Instrument Cluster Inoperative |
• | Indicator Always On or Inoperative |
• | SERVICE VEHICLE SOON Indicator Always On |
|
2
|
- Turn the ignition switch to OFF.
- Buckle the left front safety belt.
- Turn the ignition switch in RUN.
| The SEAT
BELT indicator illuminates for 5 seconds.
| Indicator Always On or Inoperative
|
3
| Apply the
parking brake.
| The BRAKE indicator illuminates.
| Indicator Always On or Inoperative
|
4
|
- Engage the left turn signal.
- Engage the right turn signal.
- Engage the hazard flasher switch.
|
• | The left turn indicator flashes. |
• | The right turn indicator flashes. |
• | Both turn indicators flash at the same time. |
|
• | Turn Indicator Inoperative |
• | Both Turn Indicators Inoperative |
|
5
| Turn
on the headlight high beams.
| The high beam indicator illuminates.
|
High Beam Indicator Inoperative Indicator
- High Beam Inoperative
|
6
|
- Set the headlights on.
- Adjust the instrument panel dimmer control.
| The instrument
cluster illuminates and the dimmer control varies the illumination intensity.
|
Interior Lights Dimming System Check Interior Lights Dimming System Check
|
7
| Start the engine.
|
• | The fuel gauge indicates the fuel level. |
• | The temperature gauge indicates the engine coolant temperature. |
• | The tachometer indicates the engine RPM. |
• | The speedometer displays zero. |
|
|
8
| Press
the ENG/MET button.
|
• | The odometer and the speedometer change measurement unit values
(MPH or km/h). |
• | The appropriate MPH or km/h indicator illuminates. |
|
• | ENG/MET Button Inoperative |
• | MPH or km/h Indicator Inoperative. Refer to One Indicator Always
On or Inoperative. |
|
9
| Press
the TRIP RESET button (w/o UB7).
| The trip odometer resets to zero.
| TRIP RESET (RESET W/O UB7) Button
Inoperative
|
10
| Press the GAGE button (w/UB7).
| The DIC cycles through the DIC gauge messages.
| GAGE Button Inoperative
|
11
| Press the FUEL INFO button (w/UB7).
| The DIC cycles through the DIC fuel messages.
| FUEL INFO Button Inoperative
|
12
| Press the ODO/TRIP button (w/UB7).
| The DIC cycles through the DIC trip messages.
| ODO/TRIP Button Inoperative
|
13
| Press the RESET button (w/UB7).
| The trip odometer resets to zero.
| TRIP RESET (RESET W/UB7) Button
Inoperative
|
14
|
- Press the brake pedal.
- Cycle the gear selector lever through all gear positions.
| The PRNDL
displays the correct gear positions.
| PRNDL Indicator Inoperative
|
15
| Drive the vehicle at 30 mph.
| The speedometer
displays the vehicle speed.
| Speedometer Inoperative
|
* Refer to the appropriate symptom
diagnostic table for the applicable abnormal result.
|