Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Vehicle Theft Deterrent (VTD) System check performed? | -- | Go to Step 2 | |
2 |
Does the voltage measure within specified range? | 10-15 V | Go to Step 3 | Go to Step 5 |
3 |
Does the voltage measure within the specified range? | 10-15 V | Go to Step 4 | Go to Step 6 |
4 | Use a DMM to measure the voltage across the harness connector terminal E and B. Does the voltage measure within specified range? | 10-15 V | Go to Step 8 | Go to Step 7 |
5 | Locate and repair an open or short in CKT 40 (ORN). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
6 | Locate and repair an open or short to ground in CKT 1020 (PNK). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
7 | Locate and repair an open or short to ground in CKT 351. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
8 | Did you replace the VTD module? | -- | Go to Step 10 | Go to Step 9 |
9 | Replace the VTD module. Refer to Theft Deterrent Module Replacement . Refer to Programming Theft Deterrent System Components . Did you complete the repair? | -- | -- | |
10 | Reprogram the powertrain control module (PCM). Refer to Powertrain Control Module Replacement/Programming in Engine Controls. Does the PCM work correctly? | -- | Go to Step 11 | |
11 | Replace the PCM. Refer to Powertrain Control Module Replacement/Programming in Engine Controls. Did you complete the repair? | -- | -- |
