Removal Procedure
- Remove the fuel injector site shield. Refer to
Fuel Injector Sight Shield Replacement
in Engine
Mechanical.
- Disconnect the cruise
control cable (1) at the TBI cam and the throttle body bracket (2).
- Disconnect the cruise control cable from
the cruise control module.
Turn the cable lock (3) until the cable disengages from the module (1).
- Release the cable (2) from the connector on the module
cord (4).
Important: Note the cable routing for replacement.
- Remove the cable from the retainers (1).
Installation Procedure
Important: The nylon cord from the module must be flat. The cord must not be twisted.
- Connect the cruise control cable (2) to the cruise control module
cord connector (4).
- Seat the cable end (3) into the module (1).
Turn the cable until the cable is locked to the module (1).
- Connect the cruise control
cable to the cruise control module.
- Install the cruise control cable slug (1) to the TBI cam.
Ensure that the cable is under the hook.
- Snap the cable (2) to the throttle body bracket.
- Install the cable to the
retainers.
- Adjust the cable. Refer to
Cruise Control Cable Adjustment
.
- Install the fuel injector site shield. Refer to
Fuel Injector Sight Shield Replacement
in Engine
Mechanical.