Removal Procedure
- Remove the push pin (2)
from the upper front corner of the door.
- Remove the weather-strip (1) from the retainer along the
header and B-pillar.
- Remove the door mounted weather-strip (1) at the bottom
of the door by removing the push-in fasteners.
Installation Procedure
- Install the push pin (2)
through the weather-strip in the upper front corner of the B-pillar.
- Install the weather-strip (1) into the channel along the
header and B-pillar.
- Install the weather-strip (1) to the bottom of the door.
- Secure the push-in retainers to the holes in the inner
door panel.