Removal Procedure
- Remove the center pillar trim panel. Refer to
Center Pillar Garnish Molding Replacement
in Interior Trim.
- Remove the rear seat cushion.
Refer to
Rear Seat Cushion Replacement
in Seats.
- Disengage the front sill plate retainers by pulling upward.
- Disengage the rear sill plate by pulling upward.
Remove the rear sill plate.
- Remove the weather-strip (1).
Installation Procedure
Important:
• | The single blue line on the weather-strip is for the right side
of the vehicle. |
• | The double blue line on the weather-strip is for the left side
of the vehicle. |
- Line up the locating mark. Start at the upper corner of the B-pillar.
- Push the weather-strip (1) onto the pinchweld. Work downward
from the corner and continue around the entire opening.
- Ensure that the weather-strip (1) is seated around the
entire opening.
- Install the rear sill plate. Refer to
Rear Side Door Sill Plate Replacement
in Interior Trim.
- Engage the front sill plate retainers by pushing downward.
- Install the rear seat cushion. Refer to
Rear Seat Cushion Replacement
in Seats.
- Install the center pillar trim panel. Refer to
Center Pillar Garnish Molding Replacement
in Interior Trim.