Did you perform the Power mirrors System Check?

--

Go to Step 2

Go to Outside Mirrors System Check

1. Disconnect the driver door module (DDM) connector C5.
2. Connect a digital multimeter (DMM) between the DDM connector C5 terminal B and terminal H.
3. Turn on the rear defogger.

Does the voltage measure within the specified range?

10-15 V

Go to Step 5

Go to Step 3

1. Connect a scan tool to the DLC.
2. Select DDM.
3. Select MIRROR OUTPUTS.
4. Use the scan tool to turn on the mirror heat.

Does the voltage measure within the specified range?

10-15 V

Go to Rear Window Defogger Inoperative in Stationary Windows

Go to Step 4

Replace the DDM.

Refer to Front Door Module Replacement .

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

Replace the mirror. Refer to Power Mirror Replacement .

Did you complete the repair?

--

Go to Outside Mirrors System Check

--