Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you perform the Power Seat Memory System Check?
| --
| Go to
Step 2
| Go to
Memory Seats System Check
|
2
|
- Operate the LH seat switch in the inoperative position.
- Use the test lamp in order to backprobe the seat switch connector
from cavity L (BLK) to one of the following LH seat connector cavities:
• | Rear vertical down: cavity C (LT BLU) |
• | Rear vertical up: cavity F (YEL) |
• | Front vertical down: cavity A (DK BLU) |
• | Rear vertical up: cavity D (DK GRN) |
• | Entire seat back: cavity B (LT GRN) |
• | Entire seat forward: cavity E (TAN) |
• | Recline back: cavity G (LT BLU) |
• | Recline forward: cavity H (LT GRN) |
• | Headrest down: cavity M (DK BLU/WHT) |
• | Headrest up: cavity K (WHT/BLK) |
Does the test lamp light?
| --
| Go to
Step 3
| Go to
Step 4
|
3
| Test for an open in one of the following circuits:
• | Rear vertical down: CKT 1521 (LT BLU) |
• | Rear vertical up: CKT 1519 (YEL) |
• | Front vertical down: CKT 1520 (DK BLU) |
• | Rear vertical up: CKT 1518 (DK GRN) |
• | Entire seat back: CKT 1523 (LT GRN) |
• | Entire seat forward: CKT 1522 (TAN) |
• | Recline back: CKT 277 (LT BLU) |
• | Recline forward: CKT 276 (LT GRN) |
• | Headrest down: CKT 1069 (DK BLU/WHT) |
• | Headrest up: CKT 1068 (WHT/BLK) |
Refer to
Testing for Continuity
in Wiring Systems.
Is there an open in the circuit?
| --
| Go to
Step 8
| Go to
Step 5
|
4
| Replace the LH seat switch. Refer to
Power Seat Switch Replacement
.
Is the repair complete?
| --
| Go to
Step 9
| --
|
5
|
- Disconnect the faulty seat motor connector.
- Connect a fused jumper from battery positive voltage (B+) to one
seat motor cavity.
- Connect a fused jumper from the other seat motor cavity to ground.
Does the motor run?
| --
| Go to
Step 6
| Go to
Step 7
|
6
| Repair the open or the short to ground in one of the following circuits:
• | Rear vertical down: CKT 283 (LT BLU) |
• | Rear vertical up: CKT 282 (YEL) |
• | Front vertical down: CKT 287 (DK BLU) |
• | Rear vertical up: CKT 286 (DK GRN) |
• | Entire seat back: CKT 284 (LT GRN) |
• | Entire seat forward: CKT 285 (TAN) |
• | Recline back: CKT 277 (LT BLU) |
• | Recline forward: CKT 276 (LT GRN) |
• | Headrest down: CKT 1258 (GRY) |
• | Headrest up: CKT 1257 (WHT) |
Refer to
Wiring Repairs
in
Wiring Systems.
Is the repair complete?
| --
| Go to
Step 9
| --
|
7
| Replace the faulty seat motor.
Is the repair complete?
| --
| Go to
Step 9
| --
|
8
| Repair the faulty wiring. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Step 9
| --
|
9
| Perform the Diagnostic System Check. Refer to
Memory Seats System Check
.
Was the Memory Seats System Check performed?
| --
| System OK
| --
|