TWO NEW KITS HAVE BEEN RELEASED TO SERVICE THE POWERTRAIN CONTROL MODULE (PCM) CONNECTOR IF THE CONNECTOR HAS BEEN DAMAGED DURING SERVICING. THIS PCM HAS AN ALUMINUM BODY AND IS USUALLY MOUNTED UNDERHOOD.
KIT (P/N 12167308) CONTAINS THE 80 WAY CONNECTOR BODY, THE COVER, TWO EACH OF FOUR DIFFERENT TERMINAL RETAINERS AND 25 EMPTY CAVITY PLUGS. NO TERMINALS ARE INCLUDED.
IF TERMINALS ARE NEEDED, USE P/N 12084913 FOR .35 MM AND .50 MM WIRE AND P/N 12084912 FOR .80 MM WIRE. THESE TERMINALS ARE INCLUDED IN THE TERMINAL REPAIR KIT J 38125A OR B, AND REPLACEMENTS CAN BE ORDERED FROM KENT-MOORE.
KIT (P/N 12167313) CONTAINS ONE CONNECTOR SEAL. WHENEVER THE CONNECTOR IS UNBOLTED FROM THE ALUMINUM BODY OF THE PCM, THE SEAL CAN STICK TO THE BODY, OR MAY BE TWISTED. THIS SEAL SHOULD BE REPLACED WHENEVER THE CONNECTOR IS REMOVED IN SERVICE.
P/N DESCRIPTION =============== ====================================
12167308 KIT, PCM HARNESS REPAIR
12167313 SEAL KIT, PCM CONNECTOR
12084912 TERMINAL
12084913 TERMINAL
PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.
FIGURES: 00 ATTACHMENTS: 00
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1998 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.