GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 Park Avenue 🢒 HVAC 🢒 HVAC Systems - Automatic 🢒 Control Assembly Replacement - Passenger

Removal Procedure
  1. Remove the right IP trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Right Side in Instrument Panel, Gauges and Console.

    2. Object Number: 567513 Size: SH
  2. Remove the two retaining screws (1) from the passenger control switch and remove.

Installation Procedure

    Object Number: 567513 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the passenger control and screws (1) into the trim plate.

    2. Tighten
    Tighten the screws to 1.4 N·m (12 lb in).

  2. Install the IP trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Right Side in Instrument Panel, Gauges and Console.