1

Did you perform the Instrument Cluster Diagnostic System Check?

--

Go to Step  2

Go to Diagnostic System Check - Instrument Cluster

1. Turn the ignition switch to RUN.
2. Connect the scan tool.
3. Select the Instrument Cluster Input menu.

Does the scan tool display Low Fuel Lamp Off?

--

Go to Fuel Gage Inaccurate or Inoperative

Go to Step  3

Replace the instrument cluster (IPC). Refer to Instrument Cluster Replacement .

Did you complete the repair?

--

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step  2