Shift Lever Does Not Move with Brake Pedal Depressed. Buick Park Avenue 2003

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2003 🢒 Park Avenue 🢒 Transmission/Transaxle 🢒 Shift Lock Control 🢒 Shift Lever Does Not Move with Brake Pedal Depressed

Step	Action	Yes	No
Schematic Reference: Shift Lock Control Schematics Connector End View Reference: Shift Lock Control Connector End Views or Body Control System Connector End Views DEFINITION: Transmission shift lever does not move out of the PARK position with ignition ON and the brake pedal pressed.
1	Did you perform a Diagnostic System Check - Automatic Transmission Shift Lock Control?	Go to Step 2	Go to Diagnostic System Check - Automatic Transmission Shift Lock Control
2	Turn ON the ignition, with the engine OFF. Press and hold the brake pedal. Attempt to move the shift lever out of the PARK position. Does the shift lever move out of the PARK position?	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 3
3	Turn OFF the ignition. Disconnect the automatic transmission shift lock control switch. Turn ON the ignition, with the engine OFF. Press and hold the brake pedal. Attempt to move the shift lever out of the PARK position. Does the shift lever move out of the PARK position?	Go to Step 5	Go to Step 4
4	Connect a test lamp between the A/T shift lock control solenoid supply voltage circuit at the automatic transmission shift lock control solenoid and a good ground. Does the test lamp illuminate?	Go to Step 7	Go to Step 6
5	Inspect for poor connections at the harness connector of the automatic transmission shift lock control switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Inspect for proper adjustment of the automatic transmission shift lock control switch. Refer to Stop Lamp Switch Adjustment in Lighting Systems. Did you find and correct the condition?	Go to Step 10	Go to Step 8
6	Inspect for poor connections at the harness connector of the automatic transmission shift lock control solenoid. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 10	Go to Step 9
7	Repair the short to battery positive voltage in the automatic transmission shift lock control supply voltage circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair?	Go to Step 10	--
8	Replace the automatic transmission shift lock control switch. Refer to Stop Lamp Switch Replacement in Lighting Systems. Did you complete the replacement?	Go to Step 10	--
9	Replace the automatic transmission shift lock control solenoid. Refer to Automatic Transmission Shift Lock Actuator Replacement . Did you complete the replacement?	Go to Step 10	--
10	Operate the system in order to verify the repair. Did you find and correct the condition?	System OK	Go to Step 2