GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2003 🢒 Park Avenue 🢒 HVAC 🢒 Heating, Ventilation and Air Conditioning 🢒 Compressor Pressure Relief Valve Installation

    Object Number: 237069 Size: SH
  1. Clean the valve seat area on the rear head.
  2. Lubricate the O-ring of the new pressure relief valve and the O-ring assembly using new 525 viscosity refrigerant oil.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the new pressure relief valve (2).

    4. Tighten
    Tighten the valve to 9 N·m (80 lb in).

  4. Perform a leak test. Refer to Compressor Leak Testing .