GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2003 🢒 Park Avenue 🢒 Body and Accessories 🢒 Bumpers 🢒 Rear Bumper Fascia Extension Replacement

Removal Procedure

    Object Number: 794801 Size: SH
  1. Remove the screw (3) securing the rear fascia extension (1) to the vehicle.
  2. Remove the screws (2) retainers securing the rear fascia extension (1) to the rear fascia.
  3. Remove the rear fascia extension (1) from the vehicle.

Installation Procedure

    Object Number: 794801 Size: SH
  1. Position the rear fascia extension (1) to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws (2) to secure the rear fascia extension (1) to the rear fascia.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Install the screw (3) to secure the rear fascia extension (1) to the vehicle.

    4. Tighten
    Tighten the screw to 2 N·m (18 lb in).