Removal Procedure
- Insert a flat-bladed
tool at the rear edge of the access door in order to disengage the lock tab.
- Disengage the forward tabs from the overhead console.
- Disconnect the electrical connector.
- Remove the 2 screws (1) from the sunroof switch
to the overhead console.
- Remove the switch.
Installation Procedure
- Install the switch.
- Install the 2 screws (1) attaching the sunroof switch
to the overhead console.
- Connect the electrical connector.
- Position the access door. Align the forward tabs into the overhead
console.
- Push upward the access door in order to engage the rear lock tab.