For 1990-2009 cars only
Removal Procedure
- Insert a flat-bladed tool under the front edge of the switch plate.
- Gently pry upwards in order to release the front edge of the switch plate from the door trim panel.
- Slide the switch forward in order to release the rear retainer tabs.
- Disconnect the electrical connectors.
- Remove the switch pack (2) from the switch plate (1) by releasing the retainer tabs with a small flat-bladed tool.
Installation Procedure
- Snap the switch pack into the switch plate.
- Connect the electrical connectors.
- Install the tabs at the rear end of the switch plate under the door trim panel.
- Press down on the front of the switch plate in order to engage the retainer clip.
