GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 258799  Size: SH
  1. Remove the fastener from the center support (1).
  2. Remove the 3 fasteners from the outboard side of the sunshade.
  3. Attach the sunshade to the center support.
  4. Pull down on the sunshade in order to remove the sunshade from the headliner.
  5. Partially lower the headliner in order to disconnect the wire connector (if equipped) with a lighted vanity mirror.

Installation Procedure


    Object Number: 258799  Size: SH
  1. Connect the electrical connector, if the vehicle is equipped with a lighted vanity mirror.
  2. Install the sunshade through the openings in the headliner.
  3. Install the 3 fasteners on the outboard side of the sunshade.
  4. Install the fastener for the center support (1).
  5. Attach the sunshade to the center support.