For 1990-2009 cars only
Removal Procedure
- Open the vanity cover (1).
- Use a thin-bladed tool in order to disengage the 5 front snap legs (4) at the lower edge of the sunshade.
- Pull out and down in order to remove the vanity (5).
- Note the wire routing for re-assembly.
- Disconnect the wire connectors from the vanity (5) on vehicles equipped with a lighted vanity.
Installation Procedure
- Ensure that the wires are correctly routed.
- Connect the wire connectors.
- Insert the top end of the vanity (5) into the sunshade.
- Engage the snap legs (4).
- Close the vanity mirror.
