Removal Procedure
- Remove the fastener from
the center support (1).
- Remove the 3 fasteners from the outboard side of the sunshade.
- Attach the sunshade to the center support.
- Pull down on the sunshade in order to remove the sunshade from
the headliner.
- Partially lower the headliner in order to disconnect the wire
connector (if equipped) with a lighted vanity mirror.
Installation Procedure
- Connect the electrical
connector, if the vehicle is equipped with a lighted vanity mirror.
- Install the sunshade through the openings in the headliner.
- Install the 3 fasteners on the outboard side of the sunshade.
- Install the fastener for the center support (1).
- Attach the sunshade to the center support.