Removal Procedure
- Position the manual release cable through the slot in the rear
compartment trim, from the inside of the rear compartment.
- Remove the push-in retainers from the fuel filler
door actuator.
- Remove the fuel filler door actuator.
- Disconnect the electrical connector from the actuator.
Installation Procedure
- Connect the electrical connector to the actuator.
- Install the fuel filler door actuator.
- Install the push-in retainers to the fuel filler door actuator.
- Insert the manual release cable through a slot in the rear compartment
trim.
- Verify proper operation of the fuel filler door.