For 1990-2009 cars only
- There are four studs located at the inside edge of the trunk lid. Remove the protective vinyl caps from the studs.
- Remove the nuts from the studs.
- Remove the six fasteners along the top of the trunk lid (three on each side), holding the trunk trim in place.
- Pull the trunk trim back to expose the three remaining nuts holding the taillamp assembly in place. Remove the protective vinyl caps from the studs.
- From inside the trunk compartment, remove the nuts from the studs.
- Pull the taillamp assembly away from the trunk lid. The bulbs are located on the back side of the assembly.
- Turn the bulb socket one-quarter turn counterclockwise and pull it out. You can use a tool to remove the bulb socket if you are unable to do it by hand.
- Once the socket has been removed, pull the bulb straight out to remove it from the socket.
- Replace it with a new bulb.
- Reverse Steps 1 through 8 to reinstall the taillamp assembly.
