J 45059 Electronic Torque Angle Meter
Notice: This engine uses special torque to yield head bolts. This design bolt requires a special tightening procedure. Failure to follow the given procedure will cause head gasket failure and possible engine damage.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
ā¢ | Tighten the cylinder head bolts in sequence (1-8) to 50 NĀ·m (37 lb ft). |
ā¢ | Rotate each bolt 120 degrees in sequence (1-8). Use the J 45059 . |