For 1990-2009 cars only
- Open the trunk.
- On either side of the rear of the trunk is a plastic retainer that holds the cargo net and taillamp assembly in place. Remove the retainer by turning it counterclockwise.
- Remove the plastic retaining screws on the trunk's interior.
- Pull back the trunk trim panel.
- Beneath the trim panel are three nuts that secure the taillamp assembly. Remove the nuts only from the side you want to access. The turn signal and stoplamp can now be accessed.
- Pull the taillamp assembly away from the vehicle.
- Remove the bulb socket assembly by turning the socket one-quarter turn counterclockwise and pulling it out.
- Once the socket has been removed, pull the bulb straight out to remove it from the socket.
- Replace it with a new bulb.
- Reverse Steps 1 through 8 to reinstall the taillamp assembly.
