Notice: Use care in removing the fuel injectors in order to prevent damage to the fuel injector electrical connector pins or the fuel injector nozzles. Do not immerse the fuel injector in any type of cleaner. The fuel injector is an electrical component and may be damaged by this cleaning method.

Important: The fuel injector is serviced as a complete assembly only. If the fuel injectors are found to be leaking, the engine oil may be contaminated with fuel. Fuel injector O-rings should always be replaced whenever fuel injectors are serviced.

1. Remove the fuel rail. Refer to Fuel Injection Fuel Rail Assembly Replacement .
2. Remove the fuel injector retaining clip (1).
3. Remove the fuel injector (3).
4. Remove the fuel injector upper O-ring (2).
5. Remove the fuel injector lower O-ring (4).

Caution: In order to reduce the risk of fire and personal injury that may result from a fuel leak, always install the fuel injector O-rings in the proper position. If the upper and lower O-rings are different colors (black and brown), be sure to install the black O-ring in the upper position and the brown O-ring in the lower position on the fuel injector. The O-rings are the same size but are made of different materials.

Important: When ordering new fuel injectors, be sure to order the correct injector for the application being serviced.

The fuel injector assembly (1) is stamped with a part number identification (2).

1. Coat all new O-rings with clean engine oil before installing.
2. Install the fuel injector lower O-ring (4).
3. Install the fuel injector upper O-ring (2).
4. Install the fuel injector (3) to the fuel rail.
5. Install the fuel injector retaining clip (1).
6. Install the fuel rail. Refer to Fuel Injection Fuel Rail Assembly Replacement .