GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 599887  Size: SH
  1. Remove rear shelf trim from inside of rear storage compartment. Refer to Rear Compartment Trim Panel Replacement.
  2. Disconnect the electrical connector from the module.
  3. Remove the module retainers (2).
  4. Remove RFA module (1) from the shelf (2).

Installation Procedure


    Object Number: 599887  Size: SH
  1. Position the RFA module (1) into the shelf.
  2. Install the module retainers (2).
  3. Connect the electrical connector.
  4. Install rear storage compartment trim. Refer to Rear Compartment Trim Panel Replacement.
  5. Program RFA module. Refer to Control Module References for programming and setup information.