Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Schematics Connector End View Reference: Master Electrical Component List in Wiring Systems | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
2 |
Important:: The instrument panel (I/P) compartment door must close properly for the I/P compartment lamp to operate properly. Open and close the I/P compartment. Does the I/P compartment lamp operate properly? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Disconnect the I/P compartment lamp switch. Did the I/P compartment lamp turn OFF? | Go to Step 4 | Go to Step 5 |
4 | Inspect for poor connections at the harness connector of the I/P compartment lamp switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 7 | Go to Step 6 |
5 | Repair short to ground in the I/P compartment lamp control circuit of the I/P compartment switch. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 7 | -- |
6 | Replace the I/P compartment lamp switch. Refer to Instrument Panel Compartment Door Latch Replacement in Instrument Panel, Gages and Console. Is the switch replacement complete? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
