For 1990-2009 cars only
Removal Procedure
- Remove the wire harness cover from the lighted rearview mirror, if equipped.
- Use a small flat-bladed tool in order to remove the rearview mirror from the rearview mirror support.
- Disconnect the electrical connector from the lighted rearview mirror, if equipped.
Installation Procedure
- Connect the electrical connector to the lighted rearview mirror, if equipped.
- Snap the rearview mirror into the rearview mirror support. Ensure that the mirror is fully seated.
- Install the wire harness cover to the lighted rearview mirror, if equipped.
- Refer to Control Module References for programming and setup information.
