Instrument Cluster Head Up Display Replacement for Buick Park Avenue 2005

1. Remove the instrument panel (IP) cluster. Refer to Instrument Cluster Replacement .



2. Remove the fasteners from the head-up display (HUD) module.
3. Remove the HUD module out through the IP cluster opening.
4. Disconnect the electrical connector from the module.

1. Connect the electrical connector to the HUD module.
2. Insert the head-up display (HUD) module into the instrument panel (IP) cluster opening.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the fasteners to the HUD module.

Tighten
Tighten the fasteners to 3 N·m (26 lb in).

4. Install the IP cluster. Refer to Instrument Cluster Replacement .
5. Refer to Control Module References for programming and setup information.